|
Reference
Carl
Macher GmbH &
Co., Brunnenthal, Germany 1995
Detailed feasibility study for the rebuild of a board
machine
including waste paper stock preparation
Steinbeis
Temming Paper GmbH &
CO, Glückstadt,
Germany 1995
Detailed engineering for coating kirchen and PM rebuild
for pigment coated grades.
MD
Papier GmbH, Dachau, Germany 1994/95
Detailed engineering including erection supervision for a new
deiking line an existing building.
Badische
Karton- und Pappenfabrik, Obertsrot, Germany 1994
Detail engineering for an waste treatment plant.
Papierfabrik
Utzenstorf, Utzenstorf, Switzerland 1992
Technical economic study for the conversation of a paper
macine from one product to another product.
Sulzer
Escher Wyss GmbH, Ravensburg, Germany 1992
Detail engineering for rebuild of a paper machine.
PWA
Waldhof GmbH, Mannheim Germany 1991/92
Detail engineering for a new tissue machine at an
existing converting site in France.
Kartonfabrik
Rieger GmbH &
CO KG, Trostberg, Germany 1991/92
Detail engineering for doubling the capacity of an
existing board machine incl. the waste paper treatment
plant area. Activities included overall project
management and erection supervision services
Papierfabrik
Cham-Tenero AG, Tenero, Switzerland 1990/91
Conceptional and detail design for rebuild on
approach
flow for existing fine paper machine
Papierfabriken
Cham-Tenero AG, Tenero, Switzerland 1990
Planning and erection supervision for new head box.
Kartonfabrik
Rieger GmbH &
CO KG, Trostberg, Germany 1990
Feasibility study for doubling the capacity of ecisting
board machine.
Sulzer
Escher Wyss GmbH, Ravensburg, Germany 1989/90
Detailed engineering for a new 330 tpd deinking waste
paper line plus the rebuild of a
board machine (board
230 - 700 g/m2).
Beloit
Italia S.p.A., Pinerolo, Italy 1989/90
Complete mechanical detiled engineering for new 8 m
wide paper machine for corrugated medium in Germany
(GAP Former, extended nip presses).
Papierfabriken
Cham-Tenero AG, Cham, Switzerland 1989
Design, engineering and erection monitoring for the
rebuild of an approach flow system.
Papierfabriek
Doetinchem B.V., Doetinchem, Netherlands 1989
Detailed engineering for a waste paper pulping system
Bell
Maschinenfabrik AG, Kriens, Switzerland 1989
Pre-eingineering study for the complete rebuild of a paper
machine and an approach flow system at the Schleipen
mill.
Papierfabrik
an der Sihl, Zürich,
Switzerland 1989
Pre-eingineering study for the rebuild of a specialty
paper machine.
Papierfabrik
Hermes GmbH &
Cie KG, Düsseldorf,
Germany 1988
Detail engineering of a deinking waste paper line.
Papierfabrik
Weissenstein AG, Pforzheim, Germany 1988
Pre-engineeriing study a new multi-ply fourdrinier
paper machine.
J.M.
Voith GmbH, Heidenheim, Germany 1988
Detailed engineering for a 450 tpd waste paper stock
preparation system with deinking.
Sulzer
Escher Wyss GmbH, Ravensburg, Germany 1988
Detailed engineering ffor waste paper stock preparation
system with reject disposal system for a tissue
machine.
Gebrüder
Lang GmbH, Ettringen, Germany 1988
Design, planning and coordination of a 450 tpd deinkong
plant including the reject system.
Ziegler
Papier AG, Grellingen, Switzerland 1988
Design, planning and monitoring of a dry broke system for
a fine paper machine.
Steinbeis
&
Consorten GmbH, Brannenburf, Germany 1988
Feasibility study for production of recycled paper grades
in the USA.
Gebrüder
Grünewald
KG, Kirchhundem, Germany 1988
Design and engineering od a disperison plant
Sulzer
Escher Wyss GmbH, Ravensburg, Germany 1988
Detailed engineering for rebuild of wet end nad press
section for paper machine producing coated base paper.
J.M.
Voith GmbH, Heidenheim, Germany 1988
Process and detail engineering for a rebuild of the
approach flow system od Pepeterie de
Pont-Sainte-Maxence
(France).
Sulzer
Escher Wyss GmbH, Ravensburg, Germany 1988
Detail engineering with layout, foundation and piping
plans for rebuild of stock preparation, approach flow
system, wet end, drive and slitter-winder for
PF Gebrüder
Lang Ettringen (Germany).
|